Raspberry |
The MUNTS_0018RaspberryPi type exposes the following members.
Fields| Name | Description | |
|---|---|---|
  | J10A0 | Analog input Designator for Analog Input Grove Connector J10 pin A0 (MCP3204 input CH2. |
| J10A1 | Analog input Designator for Analog Input Grove Connector J10 pin A1 (MCP3204 input CH3. |
| J11A0 | Analog input Designator for Analog Input Grove Connector J11 pin A0 (MCP3204 input CH0. |
| J11A1 | Analog input Designator for Analog Input Grove Connector J11 pin A1 (MCP3204 input CH1. |
| J2PWM | Servo position PWM output Designator for Servo Header J2. |
| J3PWM | Servo position PWM output Designator for Servo Header J3. |
| J4D0 | GPIO pin Designator for Digital I/O Grove Connector J4 pin D0. |
| J4D1 | GPIO pin Designator for Digital I/O Grove Connector J4 pin D1. |
| J5D0 | GPIO pin Designator for Digital I/O Grove Connector J5 pin D0. |
| J5D1 | GPIO pin Designator for Digital I/O Grove Connector J5 pin D1. |
| J6D0 | GPIO pin Designator for DC Motor Driver Grove Connector J6 pin D0. |
| J6D1 | GPIO pin Designator for DC Motor Driver Grove Connector J6 pin D1. |
| J6DIR | Motor direction GPIO output pin Designator for DC Motor Driver Grove Connector J6. |
| J6PWM | Motor speed PWM output Designator for DC Motor Driver Grove Connector J6. |
| J7D0 | GPIO pin Designator for DC Motor Driver Grove Connector J7 pin D0. |
| J7D1 | GPIO pin Designator for DC Motor Driver Grove Connector J7 pin D1. |
| J7DIR | Motor direction GPIO output pin Designator for DC Motor Driver Grove Connector J6. |
| J7PWM | Motor speed PWM output Designator for DC Motor Driver Grove Connector J7. |
| J9I2C | I2C bus Designator for /dev/i2c-1 on I2C Grove Connector J9. |
| LED1 | GPIO pin Designator for the on-board LED D1. |
| SW1 | GPIO pin Designator for the on-board momentary switch SW1. |
See Also