libwioe5ham1wioe5ham1_init Method

public static void wioe5ham1_init(
	string portname,
	int baudrate,
	string network,
	int node,
	float freqmhz,
	int spreading,
	int bandwidth,
	int txpreamble,
	int rxpreamble,
	int txpower,
	out int handle,
	out int error
)

Parameters

portname  String

Serial port device name e.g./dev/ttyAMA0 or /dev/ttyUSB0.

baudrate  Int32

Serial port baud rate in bits per second (9600, 19200, 38400, 57600, 115200, or 230400).

network  String

Network ID e.g. call sign (10 ASCII characters, left justified and blank padded).

node  Int32

Network node ID (ARCNET Style: 1 to 255).

freqmhz  Single

RF center frequency in MHz, 902.0 to 928.0 (U.S. Amateur Radio Allocation).

spreading  Int32

Spreading factor (7 to 12).

bandwidth  Int32

Spread spectrum chirp bandwidth in kHz (125, 250, or 500).

txpreamble  Int32

Number of transmit preamble bits (12 is recommended).

rxpreamble  Int32

Number of receive preamble bits (15 is recommended).

txpower  Int32

Transmit power in dBm (0 to 22).

handle  Int32

Wio-E5 device handle.

error  Int32

Error code. Zero upon success.

Reference